5 GALLON Creek Premiere POTENT VIBRANT Cotton Light Pretreat CONCENTRATED

2nd Day shipping options on the drop down menu will only ship out that product, everything else will separately ground or cheapest way if the FREE SHIPPING option is chosen.  

MIX RATIO IS 1:3.25

This product is not meant to work with white ink prints.

Directions for lights are below but you can choose to use the pretreat any of these ways you'd like. Temp depends on color of the garment but lights are usually best pressed at 325F/160C and cured at the same temp or 325F/163C for 45 seconds. If you have a temperature and time that works for you then use it! Make your life simpler. 

Here's what Anthony Creek recommends:

1. Hang dry then press 2 times to push fibers down 8 seconds each press. 

2.  Press 2 intervals of 17 seconds each at 325F. You need to make sure that the pretreat is dry.  

3. Conveyor drying: Conveyor dry at 330F for 3 minutes and 2 presses of 8 second intervals depending on how much pretreat is applied. 

Usually on t shirts you will need about 19 grams of pretreat and 39 for hoodies. 

We strived to make a pretreat that may achieve the following:

*Conveyor Friendly with heat press combo when drying pretreat
*Can Be Hang Dried
*Works with many DTG’s

AND BEST OF ALL DOES NOT STAIN IN UV!

This product is to be only used with 100% cotton shirts. Using with blended garments may produce results that are questionable pre and post wash. 

For best results, use with 100% cotton shirts, may stain with any other blend, dye migration possible too.

UV results are not guaranteed, as we do not test all garments ever produced in the marketplace and we do not have control over what chemicals there might be on the garments and how they will react to our pretreat. Results of any kind are not guaranteed. We are not liable in any way for any damages or losses due to use with our products. 

WARNING: WORK IN A WELL VENTILATED AREA and use Protective Equipment (including masks and gloves) when working with specialty printing and curing products and processes (including DTF, DTG, UV etc.) as fumes and processes may be hazardous. We highly recommend the use of a fume extractor when working with DTF powder in addition to good ventilation and filtration in your work area. The use of all specialty ink printing equipment and supplies such as inks, chemicals, powders etc. are at the sole risk of the user.